To unpack the printer you will need at least2 x 3 m (80 x 120 in) of work space.

Before you start assembly, consider where you are going to place the assembled printer.
• You will need 150 mm (6 in.) of clear space on all sides of the printer.
• You will need a stable surface with an approximate height of 70 - 80 cm (28 - 32 in.), capable of holding 100Kg (220 lbs.) with a height clearance of 90 - 100 cm (36 - 40 in.)
• You will need access to a 100–240VAC ~ 12 - 7A 50/60Hz 1200W dedicated circuit within 2 m (80 in.)
• You will need access to network port or workstation (PC) within 4 m (14 ft.)

Read more

Did this answer your question?